Anti-decubitus mattress MULTIDEC
The MULTIDEC alternating pressure anti-decubitus mattress provides alternating pressure relief combined with Easy Turn Technology, moisture management and other solutions for a wide patient management issues. It is recommended for round-the-clock pressure ulcer prevention and management of all pressure ulcer stages. The pump can operate in pressure alternating, static, CLP – constant low pressure or full inflation mode. The system has the Easy Turn Technology function, i.e. lateral tilts and continuous patient rotation (one- or two-sided) manually activated. The mattress is made of transverse removable cells.
MULTIDEC can be an overlay or mattress replacement. The lower part of mattress is equipped with a pocket into which the layer of foam* can be inserted and the overlay can be easily changed into a replacement.
- ALTERNATING – periodically redistributes pressure by alternately inflating and deflating cells beneath the patient
- STATIC – pressure inside the mattress is equalised to redistribute the body weight over a greater surface area
- CLP – CONTINOUS LOW PRESSURE MODE – the pressure inside the mattress remains at a constant set level reduced by 50% compared to the set. The pump runs in CLP mode continuously until another mode is selected.
- AUTO-FIRM (full inflation mode) – Provides a temporary stable support surface to assist nursing procedures, patient transfer etc. It defaults automatically to alternating mode after 20 minutes.
AUTO SET - AUTOMATIC PRESSURE ADJUSTMENT
A built-in pressure controller automatically adjusts the mattress settings. Pressure can be also adjusted manually. The mattress will work in Auto Set mode until it’ll be switched to the manual adjustment mode.
EASY TURN TECHNOLOGY
Function of lateral tilt or patient rotation. This feature not only improves the prevention and treatment of pressure ulcers, but also helps the caregivers in their day-to-day duties. The facility can be turn on or off in accordance to the needs of users.
PATIENT WEIGHT LIMIT
MULTIDEC is suitable for patients weighing up to 200kg.
STATIC HEAD SECTION
Cells in head section are always inflated for better comfort.
iMAL – INDEPENDENT MICRO AIR LOSS
In conventional micro air loss systems the air is coming through the micro holes made in cells, but patient’s body blocks the holes and reduces the effectiveness. The iMAL system is located beneath the mattress cells and is not interfered with patient’s body.
Independent micro air loss system reduces heat accumulated in the mattress, which increases patient comfort and ensures proper microclimate around his body. The iMAL system is independent from mattress cells and therefore it does not interfere with transport functions. The iMAL system works automatically and does not require any settings.
- POWER FAIL ALARM – audible* and visual indicator of power loss
- LOW PRESSURE ALARM – audible* and visual indicator of low pressure in the mattress .
- SERVICE INDICATOR – indicates the internal fault of pump.
*An audible alarm will sound unless cancelled by the mute button. If the cause of alarm is not removed, the alarm will sound again.
Control panel AUTO-LOCKOUT
Prevents from accidental or unintentional setting changes on the pomp. After a period of inactivity the control panel will automatically lock.
INDICATION FOR USE
MULTIDEC anti-bedsore mattress replacement is designed to prevent and / or support the treatment of pressure ulcers of all degrees. Patients with pressure ulcers should be monitored and repositioned.
Treatment of pressure ulcers should be supported by other accompanying activities (e.g. nutrition support, skin care, etc.), the choice of which should be preceded by a comprehensive assessment of the patient’s individual care needs. Anti-bedsore mattresses are one of the possible treatment procedures for pressure ulcers.
All aspects of care should be reviewed by the attending physician. The above information is only a guide and should not replace the clinical evaluation.
CONTRAINDICATIONS FOR USE
The MULTIDEC mattress should not be used in patients with unstable spine fractures. For patients with unstable fractures of a different type or in a condition that can cause complications due to soft or moving surfaces, consult a physician before using the MULTIDEC mattress.
- Patient should not operate the system.
- No interference or modifications are allowed. The pump housing may only be removed by authorized service staff. The pump contains no user-serviceable parts. Do not disassemble the pump.
- Do not allow the pump to come into contact with the liquid and do not immerse the device in water. If the product is submerged in water, do not remove the product, immediately remove the plug from the power socket.
Easy Turn Technology and Advanced Turn Technology (if applied) must be used only on the beds equipped with side rails. The side rails must be obligatory raised.
- The system requires a mattress to be connected to the pump. Do not turn off the pump or remove the plug from the power socket during operation.
- Do not place the heating blanket neither on nor under the mattress.
The air hoses and the power cord should be placed at the foot of the bed so that they are not near the moving parts of the bed or in other places where they can get caught. If there are flaps on the sides of the mattress to protect the power cords, use them.
- The CPR quick release should always be visible and easily accessible.
- The mattress top cover is vapor permeable, but not air permeable, so it may pose a risk of suffocation.
- Check for gaps that could result in serious injury or death due to compression or movement of the mattress.
- The pump and mattress may only be used together as indicated in this manual and by PPH “Real”. The correct operation of the device cannot be guaranteed if incorrect pump and mattress combination are used.
- CAUTION – Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority of the Member State in which the user and/or patient is established.
- Failure to follow these recommendations may cause injury, and in extreme cases, even death. For a complete list of residual risks, please read the instruction for the specific product.
Order code: MD090-1301BTR
MATTRESS REPLACEMENT Number of cells 16 Cell material TPU Cover material poliester-PU Mattress base material poliester-PU Max patient weight 200kg
PUMP Dimensions 33,2 x 23,5 x 12,8 cm Case material ABS Mode of operation continous Supply voltage/frequency 230V/50Hz Power output 20 VA Operating cycle times 10, 15, 20, 25, 30 minutes
Degree of protection against
Class II, type BF Degree of protection against ingress of liquids IP21
Real is a stable, family found company with over 25 years of history and experience. Our portfolio includes a number of state-of-the-art products. Our anti-bedsore mattresses are based on extensive knowledge and advanced technology.
ul. Żołnierska 16 pok. 805
10-561 Olsztyn, Poland
Telephone: +48 89 534 51 61